MAN-230000-00 REV B
8
2. Charger Physical Installation
Ensure that the charging area is well ventilated, dry, and clean.
There must be at least one foot of spacing between the sides of the charger
and any adjacent walls or barriers, and two feet of spacing between the
bottom of the charger and the floor or any other obstruction.
A minimum of
six inches of spacing between the bottom of the charger and the floor is
acceptable if using one of the floor stand mounting options. If this option is used,
the air filter must be inspected and cleaned more frequently.
Do not restrict airflow to the air filter at the bottom of the charger or to the
vents at the top of the charger.
There are three mounting options available for the iHF3 charger: standard wall
mount, optional floor-mounted post stand, or shelf stand.
a. Wall Mount Option
i.
Dimensions and clearances for the wall mount option are shown in
Appendix A, page 63 of this manual.
ii.
Using the mounting-hole pattern (Figure 3), mark the locations for the
mounting hardware on the wall. Use 1/4-20 fasteners with lock and flat
washers to secure the charger to the wall.
Figure 3: Wall-mount hole pattern
18.6
6
19.25
CAUTION
