MAN-230000-00 REV B
19
2. Starting a Charge Cycle
a. Connect the battery to the charger. Once the battery is detected, one of two
messages appears on the LCD:
The LCD displays the
PUSH START TO BEGIN CYCLE
screen.
0 4 8 V 2 0 0 A
0 4 / 1 5 / 2 0 1 1 1 2 : 0 0 : 0 0
P U S H S T A R T T O
B E G I N C Y C L E
If
Charge Autostart
is set to
YES
, the charger automatically starts the charge
cycle, and briefly displays a
START CYCLE TIMER
message.
S T A R T C Y C L E T I M E R
0 0 : 0 0 : 0 1
E X I T S T A R T
If either this screen or this message is not displayed, the battery has not been
detected. Make sure that the battery cables are connected properly and verify
that the auxiliary contacts are properly connected.
NOTE:
If
Cells Autodetect
is set to
YES
, the LCD may display a
SELECT
BATTERY VOLTAGE
message.
S E L E C T B A T T E R Y
V O L T A G E
3 6 V
E X I T E N T E R
