© UPLIFT Desk
• 800-349-3839 • [email protected] • upliftdesk.com
Package Contents
Wireless Charging Power Hub
SKU: PDC010
Step 1
Place the unit on a flat, stable surface in a location where it cannot
be knocked and present a hazard.
Note:
The power cord is heavy duty 14 AWG and it may be curled
due to shipping which could keep the unit from sitting flat on the
desktop. You can work with the cord a bit to straighten the bends
so the unit will sit flat.
Another way to help the unit sit flat on the desktop is to use the
included Adhesive pads. They are sticky on both sides and will
hold your unit in place. Peel off the backing on one side and apply
the adhesive pads to the bottom of the unit. Then peel off the re
-
maining backing and place the unit in the desired location.
If the Adhesive pads become too dirty to stick to your desktop,
you can remove them from the unit, rinse them with water, blot
dry with a clean, lint-free cloth, and place them back on the unit.
While it is possible to un-stick and reposition the unit, be aware
the more you reposition the unit, the more adhesive properties
will be lost.
Step 2
Plug it into a grounded power outlet. If the blue LED indicator light
comes on, then you know power is running to the unit.
To charge your devices, you have several options:
• Plug a USB cable into one of the three Smart ID USB ports
• Plug power cords and AC Adapters (2’’ wide and smaller) into
the two power outlets on either side of the unit to either charge
more devices or to power items on your desk such as lamps, mon
-
itors, etc.
• Place your device on the unit horizontally as pictured, with the
backside touching the “wireless charge” area. We recommend re
-
moving your device from its case for best charging performance.
Devices must support 10W fast wireless charging.
Note:
Wireless charging may raise the unit’s temperature, this is
normal.
Adhesive pads
(optional, qty 2)
Power hub unit
2’’
