manualshive.com logo in svg

Power Computing PowerWave 604, User Manual

Share
Download
Power Computing PowerWave 604 User Manual Download Page 39

 

Upgrading Your Computer

 

For Technical Support, Call 1-800-708-6227

 

PowerWave 604 UserÕs Guide   

 

19

 

Installing expansion cards

 

You can install expansion cards that enhance your computerÕs capabilitiesÑfor example, by 
increasing processing power, improving graphics and video performance, or adding 
networking and communications capabilities. There are two different expansion card options 
for the PowerWave 120/132/150, depending on which riser card you have, a 3-card PCI 
option or a 2-PCI+2-NuBus card option. 

If you do not know which kind of riser card you have, remove the computer cover and look at 
the riser card which holds your video card. If that riser card has three long slots, you have a 
PCI-only system; if it has two long slots and two shorter ones, you have a PCI plus NuBus 
system. 

 

PCI-Only 

 

The PCI riser card option allows you to install up to three standard PCI cards in the riser card 
attached to the motherboard. One of those slots is Þlled with the standard high-performance 
video card shipped with the system, leaving two slots for additional PCI cards. 

PCI-only riser card

PCI plus NuBus riser card

Summary of Contents for PowerWave 604





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands