manualshive.com logo in svg

Power Computing PowerWave 604, User Manual

Share
Download
Power Computing PowerWave 604 User Manual Download Page 2

 

Power Computing Corporation

 

 

 1995, 1996 Power Computing Corporation. All rights reserved.

Under copyright laws, this manual may not be copied, in whole or in part, without the 
written consent of Power Computing. Your rights to the software are governed by the 
accompanying software license agreement.

Power Computing Corporation
10261 Bubb Road
Cupertino, CA 95014
(408) 725-7250

Power Computing is a trademark of Power Computing Corporation. Mac and the Mac OS 
logo are trademarks of Apple Computer, Inc. All other trademarks mentioned are the 
property of their respective holders. Every effort has been made in this book to distinguish 
proprietary trademarks from descriptive terms by following the capitalization style used by 
the manufacturer.

Every effort has been made to ensure that the information in this manual is accurate. Power 
Computing is not responsible for printing or clerical errors.

Other legal notices are found in ÒRegulatory InformationÓ on page 71. 

Manual Revision 960604 

 

Support Numbers

 

Customers who purchased systems directly from Power Computing please use the numbers 
listed below to contact Power Computing for assistance: (All times are United States Central 
Time.) Customers who did not purchase systems directly from Power Computing must 
contact the dealer they purchased their system from for assistance.  

 

Sales

 

To place or check on an 
order you havenÕt 
received yet 

M Ð F   8AM to10 PM 
Sat       9 AM to 6 PM 
Sun    10 AM to 6 PM 

1-800-999-7279

 

Customer 
Support

 

If you have a question or 
a problem with an order 
you have received 

M Ð F   8 AM to 6 PM

1-800-671-6227

 

Technical 
Support

 

For help with a technical 
problem

M Ð F   8 AM to 8 PM 
Sat     10 AM to 4 PM

1-800-708-6227

Summary of Contents for PowerWave 604





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands