Getting Started
For Technical Support, Call 1-800-708-6227
PowerWave 604 UserÕs Guide
3
WARNING!
For your safety, the computer is equipped with a three-prong plug
designed to be used with a grounded electrical outlet. If you do not have
access to an appropriate outlet, have an electrician install one. Do not use
your computer with a three-prong adapter in an ungrounded outlet.
To plug in the computer:
CAUTION:
Do not press the power switch on the front panel of the computer or the
keyboard power switch until you have completed all of the setup instructions.
1.
Place the computer in the location you have chosen.
2.
Set the 115/230 volt switch to the correct setting for your country.
Set the switch to 115 volts for the U.S., Canada, and Japan. Use the 230-volt setting in
most European countries.
3.
Connect the socket end of the power cord to the power plug on the back of
the computer.
4.
Plug the other end of the power cord into a grounded, three-hole electrical
outlet. If you have any expansion cards, follow the instructions in See
ÒInstalling expansion cardsÓ on page 19. to install them now. If not,
continue with the following section.
