manualshive.com logo in svg

Power Computing PowerWave 604, User Manual, Page: 33 / 92

Share
Download
Power Computing PowerWave 604 User Manual Download Page 33

 

Getting Started With Macª OS

 

For Technical Support, Call 1-800-708-6227

 

PowerWave 604 UserÕs Guide   

 

13

 

Shutting down

 

When you are Þnished working with your computer, it is very important to shut it down 
correctly. 

 

To shut down the computer:

 

1.

 

Choose 

 

Shut Down

 

 from the 

 

Special

 

 menu in Mac OS. 

 

You are prompted to save any unsaved Þles before shutting down.

 

OR 

 

2.

 

Press the 

 

power key

 

 on the keyboard 

 

A Shut Down dialog box is displayed

Choose the 

 

Shut Down

 

 option by pressing the 

 

return

 

 key.

 

CAUTION:

 

Do not use the power button on the front panel to turn off the 

computer. If you do, unsaved or open documents may be lost and you may damage 
System Þles. 

 

3.

 

In the unlikely event that the system does not respond to mouse movement 
or the keyboard, see Appendix B, ÒTroubleshootingÓ on page 53. 

S l e e p

Summary of Contents for PowerWave 604





























































































Reviews:

No comments