manualshive.com logo in svg

Power Computing PowerWave 604, User Manual

Share
Download
Power Computing PowerWave 604 User Manual Download Page 25

 

Getting Started

 

For Technical Support, Call 1-800-708-6227

 

PowerWave 604 UserÕs Guide   

 

5

 

■

 

The Macintosh-standard monitor port on the high-performance video card allows you to 
connect Macintosh-style connectors. 

 

■

 

The VGA monitor port on the high-performance video card allows you to connect a 
standard VGA or SVGA monitor and use PC-style connectors. 

 

CAUTION:

 

Do not connect monitors to both video ports of the high-performance 

video card simultaneously. 

 

You may add additional VRAM to the high-performance video card up to a total of 4 MB. 
See ÒVRAM conÞgurationsÓ on page 69 for details on monitor size, resolutions number of 
colors supported. See

 

 

 

ÒIncreasing memoryÓ on page 23 for information about how to add 

VRAM. 

Use the Monitors control panel in Mac OS to control how the monitor is conÞgured. See 
Macintosh Guide (available through the Guide menu, marked with 

) or 

 

Macintosh System 

7.5 for Dummies)

 

 for additional information about using the Monitors control panel.

Connecting the monitor involves two steps: plugging in the monitor and connecting the 
monitor cable.

 

To plug in the monitor:

 

1.

 

Place the monitor on your desk or in another location you have chosen.

 

2.

 

If necessary, connect the power cord to the monitor.

 

Some monitors have permanently attached power cords.

 

3.

 

Plug the monitor power cord into a grounded, three-hole outlet.

 

To connect the video cable:

 

1.

 

If necessary, attach the video cable to the monitor.

 

Some video cables are permanently attached.

 

2.

 

Connect the video cable to the monitor port on the back of the computer.

 

There are two types of video port connectors on the back of your computer: Macintosh-
standard and VGA. Connect your monitor to the appropriate port for your monitor. See 
Þgure below to tell which one you have. Do not connect monitors to both ports. The 
video card automatically senses which port you are using. 

Ð

If you are using a monitor with a Macintosh-standard video connector, (the larger of 
the two connectors) connect the monitor cable to the Macintosh-standard port of the 
high-performance video card. 

Summary of Contents for PowerWave 604





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands