manualshive.com logo in svg

Power Computing PowerWave 604, User Manual, Page: 3 / 92

Share
Download
Power Computing PowerWave 604 User Manual Download Page 3

 

For Technical Support, Call 1-800-708-6227

 

PowerWave 604 UserÕs Guide   

 

iii 

 

A word from the Power 
Computing team

 

0

 

Dear New Power Computer Owner,

Thank you for choosing this Mac OS compatible computer from Power Computing 
Corporation. We appreciate your support. As the new kids on the block, so to speak, weÕve 
got something to prove. We think that Ñ dollar for dollar and pound for pound Ñ Power 
Computing builds the best Mac OS compatible computers in the world. So thank you for 
giving us this opportunity to prove it to you.

Unlike some companies, we want to hear from you. Really. Give us a call anytime (or send 
us e-mail at 

 

suggestionbox@powercc.com

 

); no question is too big or small. 

Even if you donÕt call us, a Power Computing Corporation representative will be contacting 

 

you

 

 in the next few days to make sure that everything is working to your satisfaction. In the 

meantime, donÕt hesitate to let us know if there is anything else we can do for you. And 
please, if thereÕs something we could have done better, let us know that, too! Our company 
charter is to exceed your expectations in every way. Nothing less will do. 

Enjoy your new Power Computer.

Sincerely,

The Power Computing Team

Summary of Contents for PowerWave 604





























































































Reviews:

No comments