User Guide Gamatronic Electronic Industries Ltd.
µ
PS-SP 3:3, 3x220 in, 3x208 60 Hz out
Control Panel & Indicators
24
"?" (Help Button)
Pressing this button provides on-line configuration data for display purposes.
Note: Configuration can be modified in service mode only
1.
Use the UP and DOWN arrows to scroll through the information.
The following messages are presented:
•
Model type: True on-line UPS, model name etc.)
•
Serial number
•
Nominal power
•
Number of phases in and out
•
Nominal input and output voltage between phase and neutral
•
Voltage range of input and bypass
•
Nominal output current per phase
•
Nominal output frequency
•
Frequency tracking range when the inverter is synchronized to the bypass
•
Number of batteries connected in series
•
Nominal capacity of each battery (for use in calculating backup duration
where the battery current meter option is installed)
•
DC shutdown voltage in battery discharge mode
•
Bypass: YES for option with bypass, NO for option without bypass
•
Rectifier: YES for UPS, NO for DC/AC inverter
•
Distance shutdown: YES if EPO and shutdown via interface alarm and RS232
are supported, NO if shutdown is inhibited
•
Par. Operation: YES for parallel UPS, NO for stand-alone UPS
•
Load LED bar: Triple for panel with 3 LED bars, Single for one integral bar
•
Input current meter: YES for specified option, NO as standard
•
Battery current meter: YES for specified option, NO as standard
•
Date of manufacture: Format DD/MM/YY
•
Date of last battery installation: Format DD/MM/YY
•
Software version number
2.
To quit the help, press the “?” button once again.
Summary of Contents for PS-SP Series
Page 1: ......
