0601-GB WARTUNG_3904
GB
MAINTENANCE AND SERVICE
- 19 -
Changing oil - Cutter bar
- Change oil after the first 50 operating hours or after 100 ha at the latest.
Note:
• Change oil when at operating temperature.
The oil is too viscid when cold. Too much old oil remains stuck to the gearwheels and because of this any suspended
matter present cannot be removed from the gearing
Quantity:
NOVADISC 730: 2 x
3.5 Liter SAE 90
NOVADISC 900: 2 x
4.5 Liter SAE 90
- Raise tractor’s lifting gear completely.
- Move hydraulic control device (ST) to ”LOWER”
- The outer end of the cutter bar must hang down.
- Take out oil drain plug (62), let run out and duly dispose waste oil
Installing cutter blades
Take note!
The arrow on the cutter blade shows the
cutter disc's direction of turn.
- To install, clean back plates from
varnish.
