2. Installation - Page 10
2.1
Unpack & Prepare the Boiler
These instructions assume you have decided on the where
the boiler will be located and the type of flue system to be
used.
1.
Carefully unpack the boiler.
2.
Do not discard any packaging until all the items are
accounted for.
3.
Check that the polythene bag contains the items shown
on the check list.
Note:
Leave the transit plate secured to the boiler until
the boiler is mounted on the wall.
4.
Pull down the control cover flap to expose the facia.
Pull off the thermostat knob. Remove the 2 screws
securing the facia to the side panels and remove the
facia/control cover carefully unclipping the two neons as
you pull the facia away.
Note:
Unplug programmer (if fitted) from back of the
control box
5.
Pull the bottom of the white front case forward to
release the bottom ball studs, continue pulling until the
top studs release, then lift slightly and pull away from
the boiler.
6.
Remove the two white side panels - 2 screws each
side.
7.
Remove the combustion chamber cover - 4 screws.
8.
Disconnect the flexible tube and fan motor wires from
the fan assembly.
9.
Remove the two screws securing the fan assembly to
the flue hood and carefully withdraw the fan.
Go to the applicable option/flue installation section
Wall Spacing Kit - Page 12.
Horizontal Rear Flue - Page 13.
Horizontal Side Flue - Page 15.
Flue Extension - Page 17.
Vertical Flue - Page 18.
Vertex Flue - Page 21.
Horizontal Fit from the Inside Flue - Page 24.
Summary of Contents for Ultra 2
