Potter PFC 2000RC Installation, Operation And Instruction Manual Download Page 2

2

PFC 2000RC • 5403521-REV N• 3/03

Potter Electric Signal Company

2081 Craig Road • P.O. Box 28480 • St. Louis, MO 63146-4161 • (314) 878-4321 • (800) 325-3936

WARRANTY INFORMATION

The essential purpose of any sale or contract for sale of any of the products listed in the POT-
TER catalog or price list is the furnishing of that product.  It is expressly understood that in
furnishing said product, POTTER does not agree to insure the Purchaser against any losses
the Purchaser may incur, even if resulting from the malfunction of said product.

POTTER warrants that the equipment herein shall conform to said descriptions as to all affir-
mation of fact and shall be free from defects of manufacture, labeling and packaging for a
period of one (1), three (3), or five (5) year'(s), depending on the product, from the invoice date
to the original purchaser, provided that representative samples are returned to POTTER for
inspection.  The product warranty period is stated on the exterior of the product package.
Upon a determination by POTTER that a product is not as warranted, POTTER shall, at its
exclusive option, replace or repair said defective product or parts thereof at its own expense
except that Purchaser shall pay all shipping, insurance and similar charges incurred in con-
nection with the replacement of the defective product or parts thereof.  This Warranty is void in
the case of abuse, misuse, abnormal usage, faulty installation or repair by unauthorized per-
sons, or if for any other reason POTTER determines that said product is not operating prop-
erly as a result of causes other than defective manufacture, labeling or packaging.

THE AFORESAID WARRANTY IS EXPRESSLY MADE IN LIEU OF ANY OTHER WARRAN-
TIES, EXPRESSED OR IMPLIED, IT BEING UNDERSTOOD THAT ALL SUCH OTHER
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MER-
CHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE ARE HEREBY EXPRESSLY
EXCLUDED.  IN NO EVENT SHALL POTTER BE LIABLE TO PURCHASER FOR ANY
DIRECT, COLLATERAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNEC-
TION WITH PURCHASER’S USE OF ANY OF THE PRODUCTS LISTED HEREIN, OR FOR
ANY OTHER CAUSE WHATSOEVER RELATING TO THE SAID PRODUCTS.  NEITHER
POTTER NOR ITS REPRESENTATIVES SHALL BE LIABLE TO THE PURCHASER OR
ANYONE ELSE FOR ANY LIABILITY, CLAIM, LOSS, DAMAGE OR EXPENSE OF ANY
KIND, OR DIRECT COLLATERAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RELA-
TIVE TO OR ARISING FROM OR CAUSED DIRECTLY OR INDIRECTLY BY SAID PROD-
UCTS OR THE USE THEREOF OR ANY DEFICIENCY, DEFECT OR INADEQUACY OF
THE SAID PRODUCTS.  IT IS EXPRESSLY AGREED THAT PURCHASER’S EXCLUSIVE
REMEDY FOR ANY CAUSE OF ACTION RELATING TO THE PURCHASE AND/OR USE
OF ANY OF THE PRODUCTS LISTED HEREIN FROM POTTER SHALL BE FOR DAMAG-
ES, AND POTTER'S LIABILITY FOR ANY AND ALL LOSSES OR DAMAGES RESULTING
FROM ANY CAUSE WHATSOEVER, INCLUDING NEGLIGENCE, OR OTHER FAULT,
SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT IN RE-
SPECT TO WHICH THE CLAIM IS MADE, OR AT THE ELECTION OF POTTER, THE RES-
TORATION OR REPLACEMENT OR REPAIR OF SUCH PRODUCT.

firealarmresources.com

Summary of Contents for PFC 2000RC





























Reviews: