Hardware Configuration Setting
ROBO-638 User’s Manual
2-1
CHAPTER 2
Hardware Configuration Setting
This chapter gives the definitions and shows the positions of jumpers, headers and
connectors. All of the configuration jumpers on ROBO-638 are in the proper
position. The default settings shipped from factory are marked with a star (
★
).
2-1 Jumpers
In general, jumpers on the single board computer are used to select options for
certain features. Some of the jumpers are designed to be user-configurable,
allowing for system enhancement. The others are for testing purpose only and
should not be altered. To select any option, cover the jumper cap over (Short) or
remove (NC) it from the jumper pins according to the following instructions. Here
NC stands for “Not Connected”. (Please refer to Figure 2-1 for jumper positions)
Figure 2-1 ROBO-638 Jumper Locations
82443BX
82371EB
W83977ATF
JP5
JP6JP7 JP8 JP9
SW1
JP1
ATI
3D RAGE PRO
AGP 2X
Adaptec
AIC-7890AB
82558B
JP10
JP3
JP4
JP2
DIMM1
DIMM2
DIMM3
DIMM4
1
2 8
1 5
3 1 3
1
JP11
JP12
