System Installation
ROBO-638 User’s Manual
3-5
Drivers Support
The ATI Graphics Drivers can be installed from ROBO-638 CD-Title directly.
3-3-3 Intel 82558 Fast Ethernet Controller
The following table will show you how to enable and disable on-board LAN
function by putting jumpers at proper position.
JP2 FUNCTION
NC
Enable on-board LAN
Short
Disable on-board LAN
Drivers Support
There is only one diskette to support LAN drivers in various O.S. environments.
Intel EtherExpress ( TM ) PRO/100+ PCI LAN Adapter
v1.63 (Disk 1 of 1)
NOTE : You can capture the backup files from ROBO-638 CD-Title if
your installation diskette is defective.
3-3-4 On-board LED Indicator
The ROBO-638 provides two LED indicators to show LAN interface status.
These messages will give you a guide for troubleshooting.
LED1 (LAN Activity LED)
ON : indicates Tx/Rx activity
OFF : no activity
LED2 (LAN Link Integrity LED)
ON : indicates link is good in either 10 or 100 Mbps
OFF : link is bad
