How to Use This Manual
The manual describes how to configure your ROBO-638 system to meet various
operating requirements. It is divided into four chapters, with each chapter addressing a
basic concept and operation of Single Board Computer.
Chapter 1 : Introduction.
presents what you have in the inside of box and give you an
overview of the product specifications and basic system architecture for this model of
single board computer.
Chapter 2
: Hardware Configuration Setting.
shows the definitions and locations of
Jumpers and Connectors that you can easily configure your system.
Chapter 3
: System Installation.
describes how to properly mount the CPU, main
memory, and M-system flash disk to get a safe installation and give you a programming
guide of Watch Dog Timer function. In addition, it will introduce and show you the
driver installation procedure about SCSI controller, graphics controller, and Ethernet
controller.
Chapter 4
: BIOS Setup Information.
specifies the meaning of each setup
parameters and how to get advanced BIOS performance and update new BIOS. In
addition, POST checkpoint list will give you a guide of trouble-shooting.
The content of this manual and EC declaration document is subject to change without
prior notice. These changes will be incorporated in new editions of the document.
Portwell
may make supplement or change in the products described in this document
at any time.
Updates to this manual, technical clarification, and answers to frequently asked
questions will be shown on the following web site :
