19
Please note that you must only use the eBike
as described in the section “Proper use of the
eBike”. Find out about the intended use and
maximum weight of your eBike in this
important section.
During the assembly and final inspection
processes for eBikes, we carry out several
checks to ensure that they function properly.
However, the functioning of your eBike may
have been affected during transport and it is
possible that an unauthorised third party has
worked on your eBike.
The Porsche Centre or ROTWILD authorised
dealer that supplies the eBike will inform the
rider or the operator about its functions at
the latest during the handover process. The
dealer will explain in particular about the
electrical system and the correct use of the
charger.
You must check over your eBike before every
ride.
The drive train starts unexpectedly.
In order to prevent the drive train from
starting unexpectedly the first time you use
the bike or during assembly work, the drive
battery must be removed from the down
tube.
The system must be completely switched off
when you first use the bike and during care,
maintenance and repairs to ensure that an
accident does not occur.
Connecting the charger cable
Figure 7: Charger cable connector and drive
battery
Figure 8: The charging process starts
automatically.
Charging the drive battery
Before using the bike for the first time,
charge the drive battery fully. Always use the
charger that is supplied with the eMTB.
Charge the drive battery in a dry place and at
the temperature specified in the instruction
manual (0-40°C). (You can find the
information you need in the section “Drive
battery”).
First use and before every ride
