10
The frame of the PORSCHE eBike is made by
hand from high-quality carbon fibre
composite and is designed to be robust
enough for the intended category of use of
the eBike (see the section “Proper use of the
eBike”).
Damage to the frame caused by excessive
stresses, accidents or crashes.
A damaged frame can suddenly fail and
cause a crash. If your PORSCHE eBike is
damaged or if you have had an accident or a
crash, contact your ROTWILD authorised
dealer.
The PORSCHE eBike has a modern,
lightweight design and its components have
a limited life span. Different materials and
components react in different ways to wear
and fatigue caused by stress. If a component
exceeds its design service life, it can
suddenly fail. This may result in the rider
being injured.
Specific information about carbon. Please
note that carbon and aluminium behave in a
fundamentally different way when damaged.
Unlike aluminium, when carbon is
overstressed it does not become dented or
deformed.
The effects of damage to carbon are
generally internal and invisible (cracks). After
a crash, the frame and front wheel fork must
be checked by a dealer and replaced if the
carbon structure has been damaged. Carbon
components can suddenly fail as a result of
damage.
If the fibres have broken, take care when
handling the material. The fine carbon fibres
can cause injuries.
Components made from carbon must never
be straightened after they have been
damaged. They must be replaced
immediately. Paint damage must be repaired
to prevent the material from absorbing
moisture, which could have a negative
impact on its properties. Please note that
carbon fibre is highly sensitive to pressure
when clamped (for example the saddle and
dérailleur clamps).
Important information
