36
Changing gear
The shifting lever for the rear dérailleur is on
the right-hand side of the handlebars.
Each shifting lever has one large and one
small lever. The large shifting lever is used to
shift to the larger sprocket and the small
lever to the smaller sprocket.
If your eBike has an electronic shifter, the
shifting system on the right-hand side of the
handlebars has a top and bottom button. By
pressing the bottom button you change to a
larger sprocket. Press the top button to move
to a smaller sprocket.
Please check the parts list for your model to
see which type of gear shifter it is fitted with.
The correct pedalling frequency is between
70 and 90 revolutions per minute. You must
choose the right gear in order for the electric
drive system to function correctly.
Figure 24: The position of the shifting lever
(mechanical)
Figure 25: The position of the shifting lever
(electronic)
Adjusting the gear system
If you cannot change gear cleanly, you need
to make adjustments to the gear system on
the shifting level housing. Gradually unscrew
the adjuster on the shifting lever housing
with your fingers and check the functioning
of the gears after each turn.
To be able to turn the adjuster, you need to
pull it out of position slightly. Make sure that
it is back in position before you check the
functioning of the gears.
If your eBike has an electronic shifter, you
can set it up via the Settings menu on the
display.
Gear system
