16
Support switch (X/Y)
You use the support switch (X/Y) to select
the level of support you want while you are
riding. If you press the top button (X), you
increase the level of support. To reduce the
level of support, you press the bottom button
(Y).
You use the support switch (X/Y) to move
the cursor in the settings menu.
Figure 6:Support switch (X/Y)
Settings menu
On the settings menu you can choose
different options. Using the (Light) menu
item, you can switch the lights on and off, if
your bike has this option. The (Unit) menu
item allows you to switch between metric
and imperial measurements.
You cannot access the settings menu while
you are riding.
Pushing aid mode
You switch on pushing aid mode by pressing
and holding the bottom button in the support
switch (Y) for around 2 seconds. The level of
support shown in the display changes to
(WALK). Pushing aid mode only continues
working while you hold down the bottom
button in the support switch (Y). As soon as
you release the bottom button in the support
switch (Y), pushing aid mode stops. To end
pushing aid mode, you press the top button
in the support switch (X). The level of support
in the display changes from (WALK) to the
support mode you had selected before
switching to pushing aid mode.
Using pushing aid mode.
You must steer the eBike using both hands in
pushing aid mode.
Please note that because of the design of the
bike, the pedals may turn, so you should
leave enough space for them to move. The
power and speed of pushing aid mode can be
adjusted by selecting a different gear.
