manualshive.com logo in svg

Porsche Cayenne S 2006, Driver Manual

Share
Download
Porsche Cayenne S 2006 Driver Manual Download Page 90

90

Windows and Sliding Roofs

Emergency operation of sliding/

lifting roof

If the sliding/lifting roof is defective, this can be 

closed or opened manually.

f

Before performing emergency operation, 

please check whether the fuse is defective.

 Warning!

Risk of injury when closing the roof.

f

Take care to ensure that nobody can be injured 

when the roof elements are operated.

1. Open the glasses case in the roof console 

(

arrow

).

2. Unclip cover 

A

.

3. Fold up armrest.
4. Remove key 

B

 from the lower oddments tray 

(underneath the rubber mat) in the centre 

console.

Summary of Contents for Cayenne S 2006
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands