Multi-Purpose Display and Instruments
133
Setting the tyre type and size
The settings of the multi-purpose display must be
updated after changing wheels or tyres on the
vehicle.
The tyre type
and
tyre size must be selected even
if the settings for the new set of wheels are the
same as for the old wheels.
After driving off, the system starts to teach the
wheels and wheel positions on the vehicle. The
tyre pressure warning light on the speedometer
lights up during this time, and no current tyre
pressure information is available on the displays.
Note
Information on the tyre size and type can be found
on the tyre sidewall.
f
For further information on the details on the
tyre sidewall:
Please observe the chapter “INSCRIPTION ON
RADIAL TYRE” on Page 290.
Note on operation
Before fitting tyres approved by Porsche with a
size which is not already stored in the multi-
purpose display, the missing information should
be supplemented in the multi-purpose display.
f
Consult a qualified specialist workshop. We
recommend that you use a Porsche partner for
this work since these are staffed with trained
personnel and have the necessary parts and
tools.
6.
1.
MAIN MENU
> TYRE PRESS.
> SETTINGS
Select and confirm.
2.
Select TYRES.
3.
Confirm selection.
The TYRE TYPE list is displayed.
4.
Select tyre type (e.g. SUMMER)
The list with the possible tyre
sizes (e.g. for the selection
SUMMER) is displayed.
5.
Select tyre size (e.g. 18 inch).
6.
Confirm selection.
The current settings are displayed.
