manualshive.com logo in svg

Porsche Cayenne S 2006, Driver Manual

Share
Download
Porsche Cayenne S 2006 Driver Manual Download Page 125

Multi-Purpose Display and Instruments

125

Displaying/resetting average 

speed

Displaying range on remaining fuel

The range on remaining fuel is continuously 

recomputed while driving based on fuel level, 

current consumption and average consumption.

Displaying tyre pressure

This display is available only in conjunction with the 

Tyre Pressure Monitoring option.

The current tyre pressures at the actually present 

levels are displayed in the “Tyre pressure” screen 

of the on-board computer. These values would be 

identical to those of a pressure gauge connected 

to the four valves. These pressures change while 

the vehicle is being driven.
– The tyre pressures increase as the tempera-

ture in the tyres rises, e.g. during high-speed 

motorway driving.

– The tyre pressures decrease as the tempera-

tures drop, e.g. during journeys in cold regions 

(such as mountains).

The values displayed therefore do not allow 

conclusions to be drawn about possible pressure 

deviations.

f

In order to display pressure deviations from 

the prescribed pressure, select the menu item 

TYRE PRESS. in the MAIN MENU.

Displaying compass

This display is available only in conjunction with the 

Compass or PCM option.

Displaying navigation information

Navigation information can also be displayed on 

the multi-purpose display. 
This display is available only in conjunction with the 

Navigation (PCM) option.

Opening the main menu

The main menu contains the following functions:

f

PHONE

SPEED LIMIT

VEHICLE INFO

TYRE PRESS.

SETTINGS

Displaying average speed

1.

Switch ignition on.

2.

Select Ø SPEED

The average speed is displayed.

The displayed values are based on 

the distance travelled since the last 

reset to “zero”.

Resetting average speed

3.

Select Ø SPEED

The average speed is displayed.

4.

Press the ENTER button for longer 

than 1 second. 

The value is cleared.

1.

Switch ignition on.

2.

Select remaining range.

The range on remaining fuel is 

displayed.

1.

Switch ignition on.

2.

Select TYRE PRESS.

The tyre pressures are displayed.

1.

Switch ignition on.

2.

Select COMPASS.

The compass is displayed.

1.

Switch ignition on.

2.

Select NAVIGATION.

The navigation arrows are 

displayed.

1.

Switch ignition on.

2.

Select MAIN MENU.

3.

Confirm selection.

The main menu is displayed.

Summary of Contents for Cayenne S 2006
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands