manualshive.com logo in svg

Porsche Cayenne S 2006, Driver Manual

Share
Download
Porsche Cayenne S 2006 Driver Manual Download Page 130

130

Multi-Purpose Display and Instruments

Displaying status of level control

The ground clearance of vehicles equipped with 

level control is shown in the LEVEL menu.

Note on operation

The level control is adjusted by means of the 

rocker switch behind the Tiptronic selector lever in 

the centre console. 

f

For information on level control and 

height adjustment:

Please observe the chapter “AIR SUSPENSION 

WITH LEVEL CONTROL AND HEIGHT ADJUST-

MENT” on Page 196.

Displaying status of locks/

reduction

The selected driving programmes for Low Range/

High Range as well as the engaged locks can be 

displayed.

Note on operation

The driving programmes are set by means of the 

rocker switch behind the Tiptronic selector lever in 

the centre console.

f

For information on the programmes for Off 

Road and On Road driving and engaging locks/

reduction:

Please observe the chapter “DRIVING 

PROGRAMMES FOR ON-ROAD AND OFF-ROAD 

DRIVING” on Page 179.

6.

1.

MAIN MENU

> VEHICLE INFO

Select and confirm.

2.

Select LEVEL.

3.

Confirm selection.

The current level settings are 

displayed.

4.

Confirm selection.

VEHICLE INFO menu is displayed.

5.

1.

MAIN MENU

> VEHICLE INFO

Select and confirm.

2.

Select LOCKS/REDUCT.

3.

Confirm selection.

The current settings for 

- Longitudinal lock on/off

- Reduction on/off

- Transverse differential lock on/off

are displayed.

4.

Confirm selection.

VEHICLE INFO menu is displayed.

Summary of Contents for Cayenne S 2006
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands