manualshive.com logo in svg

Porsche Cayenne S 2006, Driver Manual

Share
Download
Porsche Cayenne S 2006 Driver Manual Download Page 353

Tyre Pressure and Technical Data

353

Capacities

Use only fluids and fuels authorised by Porsche. Your Porsche partner will be pleased to advise you.

1

 depending on vehicle equipment

Engine oil change quantity without oil filter

approx. 8.0 litres

Engine oil change quantity with oil filter

approx. 8.5 litres
Reference indication is the level on the oil dipstick.

Please observe the chapter “CHECKING THE ENGINE OIL LEVEL” on Page 262.

Coolant

1

approx. 18 - 21 litres

Automatic transmission with torque converter

approx. 9.0 litres

Transfer box

approx. 0.85 litre

 

Front-axle differential

approx. 1.0 litre

Rear-axle differential

approx. 1.4 litres

Locking rear differential

approx. 1.6 litres

Fuel tank

approx. 100 litres, including approx. 12 litres reserve

Fuel octane rating

The engine is designed to provide optimum performance and fuel consumption if unleaded premium fuel 

with 98 RON/88 MON is used. 

If unleaded premium fuels with octane numbers of at least 95 RON/85 MON are used, the engine’s knock 

control automatically adapts the ignition timing.

Power steering

approx. 1.5 litres hydraulic fluid Pentosin CHF 202

Brake fluid

approx. 0.95 litre
Use only genuine Porsche brake fluid or brake fluid of the same quality.

Window/

headlight washer system

approx. 7.5 litres

Summary of Contents for Cayenne S 2006
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands