manualshive.com logo in svg

Porsche Cayenne S 2006, Driver Manual

Share
Download
Porsche Cayenne S 2006 Driver Manual Download Page 310

310

Minor Repairs

D

- Towing lug cover (left)

E

- Emergency release cable

Emergency release for the spare wheel 

bracket

If the battery is flat, the only way to open the spare 

wheel bracket is by using the mechanical 

emergency release.

 Warning!

Danger of injury and risk of accident if the 

spare wheel bracket is operated improperly.

f

Perform emergency unlocking of the spare 

wheel bracket only when the vehicle is on a 

level surface. 

1. Remove cover of left towing lug 

D

.

2. Pull emergency release cable 

E

 in the direction 

of the arrow.

The spare wheel bracket is now unlocked and 

can be operated.

Summary of Contents for Cayenne S 2006
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands