Seats, Mirrors and Steering Wheel
51
Interior mirror
Basic position – lever forward
Anti-dazzle setting – lever back
Note on operation
f
When the interior mirror is being adjusted, the
anti-dazzle lever
A
must point forward.
E
- Light-emitting diodes (LED)
F
- Button for automatic anti-dazzle function
G
- Light sensors
Automatic anti-dazzle interior
mirror
Sensors on the front and rear sides of the interior
mirror measure the incident light. The mirrors
automatically change to anti-dazzle position or
revert to their normal state, depending on the light
intensity.
Note on operation
The incident light in the area of light sensors
G
must not be restricted (e.g. by stickers on the
windscreen).
Switching off automatic anti-dazzle
operation
f
Press button
F
.
Light-emitting diode
E
goes out.
Note on operation
The anti-dazzle function switches off automatically
if:
– Reverse gear is engaged
or
– Interior lighting
and/or
reading lights in the front are switched on.
Switching on automatic anti-dazzle function
f
Press button
F
.
Light-emitting diode
E
lights up.
Warning!
Risk of injury. Electrolyte fluid can emerge
from broken mirror glass. This fluid irritates
the skin and eyes.
f
If the electrolyte fluid should come into contact
with the skin or eyes, immediately rinse it off
with clean water.
See a doctor if necessary.
Risk of damage to paintwork, leather, plastic
parts and clothing. Electrolyte fluid can be
removed only while it is still wet.
f
Clean the affected parts with water.
