Parking
253
A
- Programmable keypad
B
- Light-emitting diode for status identification
Garage door opener
The garage door opener of your Porsche replaces
up to three original hand-held transmitters used to
operate various devices (e.g. garage door, gate to
the property, alarm system).
You have the option of assigning up to 3 different
signals to the keys on keypad
A
.
Warning!
Risk of accident when using the garage door
opener if persons, animals or objects are
within the range of movement of the equip-
ment that is being operated.
f
When using the garage door opener, ensure
that no persons, animals or objects are within
the range of movement of the equipment that
is being operated.
f
Observe the safety notes for the original hand-
held transmitter.
Notes on operation
f
Always use the garage door opener in the
direction of travel.
Otherwise, range restrictions cannot be ruled
out.
f
Before selling the vehicle, delete the
programmed signals of the garage door
opener on the keypad.
f
Please read the instructions for the original
hand-held transmitter to find out whether the
original transmitter is equipped with fixed or
changeable code.
Deleting programmed signals from the
keys
This process deletes the standard codes set at
the factory. Do not repeat this process if you
would like to assign additional signals to the keys.
f
Keep the two outer buttons of keypad
A
depressed for approximately 20 seconds until
light-emitting diode
B
begins to flash.
