manualshive.com logo in svg

Pontiac 2000 Bonneville, Owner'S Manual

Share
Download
Pontiac 2000 Bonneville Owner'S Manual Download Page 307

6-32

Bulb Replacement

For any bulb changing procedure not listed in this
section, contact your dealer’s service department.

Halogen Bulbs

CAUTION:

Halogen bulbs have pressurized gas inside and
can burst if you drop or scratch the bulb. You or
others could be injured. Be sure to read and
follow the instructions on the bulb package.

If you go through a high pressure car wash, or it is very
humid, your headlamps may “fog up.” This is normal.
The lenses should clear by themselves in time.

Headlamps

For the proper bulb type, see “Replacement Bulbs” in
the Index.

1. Reach behind the headlamp assembly, push in and

turn the bulb assembly counterclockwise to remove
the bulb assembly from the headlamp assembly.

Summary of Contents for 2000 Bonneville



















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands