manualshive.com logo in svg

Pontiac 2000 Bonneville, Owner'S Manual

Share
Download
Pontiac 2000 Bonneville Owner'S Manual Download Page 177

3-17

PUSHBUTTONS: The six numbered pushbuttons let
you return to your favorite Program Types (PTYs).
These buttons have factory PTY presets. You can set up
to 12 PTYs (six FM1 and six FM2). Just:

1. Press PROG

-

TYPE, if it is not already on.

2. Press AM

-

FM to select FM1 or FM2.

3. Turn the SELECT knob to select a PROG

-

TYPE.

4. Press and hold one of the six numbered buttons until

you hear a beep. Whenever you press that numbered
button, the PTY you set will return.

5. Repeat the steps for each pushbutton.

ALERT!: This type of announcement warns of national
or local emergencies. You will not be able to turn off
alert announcements. ALERT! appears on the display
when an alert announcement plays. When an alert
announcement comes on the tuned radio station, you
will hear it, even if the volume is muted or a cassette
tape or compact disc is playing. If the cassette tape or
compact disc player is playing, play will stop for the
announcement and resume when the announcement 
is finished.

ALTERNATE FREQUENCY: This feature allows 
the radio to switch to a stronger station with the same
program type. Press and hold AM

-

FM for two seconds

to turn alternate frequency on. AF ON will appear on the
display. The radio may switch to stronger stations. Press
and hold AM

-

FM again for two seconds to turn alternate

frequency off. AF OFF will appear on the display. The
radio will not switch to other stations.

Adjusting the Speakers

BAL

-

FADE: This button adjusts balance and fade. 

To adjust balance, press this button until BAL appears
on the display. Turn the SELECT knob clockwise for 
the right speakers and counterclockwise for the left
speakers. The middle position balances the sound
between the speakers. To adjust fade, press this button
until FAD appears on the display. Turn the SELECT
knob clockwise to adjust the sound to the front speakers
and counterclockwise for the rear speakers. The middle
position balances the sound between the speakers. Press
and hold this button for two seconds to return both fade
and balance to the middle position.

Summary of Contents for 2000 Bonneville



















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands