manualshive.com logo in svg

Pontiac 2000 Bonneville, Owner'S Manual

Share
Download
Pontiac 2000 Bonneville Owner'S Manual Download Page 146

2-82

If you can’t see the HUD image when the ignition is on,
check to see if:
D The HUD unit is covered,
D the HUD dimmer control is adjusted correctly,
D the HUD image is adjusted to the proper height, or
D a fuse in the fuse panel may be blown. See “Fuses

and Circuit Breakers” in the Index.

If the HUD image is not clear, it could be too bright.
Move the HUD dimmer control further downward. 
You may need to clean the windshield and HUD lens.

Your windshield is part of the HUD system. If you ever
have to have a new windshield, be sure to get one
designed for HUD. If you don’t, the HUD image may
look blurred and out of focus.

Systems Monitor (If Equipped)

If you have the systems
monitor, it gives you
important safety and
maintenance facts about
your vehicle.

When you turn the ignition on, the systems monitor and
warning lights will briefly light up. If a problem is
detected, the warning lights will turn on and a chime
will sound.

Summary of Contents for 2000 Bonneville



















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands