manualshive.com logo in svg

Pontiac 2000 Bonneville, Owner'S Manual

Share
Download
Pontiac 2000 Bonneville Owner'S Manual Download Page 155

2-91

Scroll through the following messages and 
feature options:
D AUTO DOOR LOCKS 

-

 OFF/ON

D UNLOCK 

-

 OFF/ON

D UNLOCK 

-

 KEY OFF/PARK

D DOOR TO UNLOCK 

-

 DRIVER/ALL

D WINDOW LOCKOUT 

-

 R + PASS/REAR

D KEYLESS FEEDBACK 

-

 OFF/ON

D LIGHTS FEEDBACK 

-

 OFF/ON

D HORN FEEDBACK 

-

 OFF/ON

D DELAYED LOCKING 

-

 OFF/ON

D PERIMETER LIGHTS 

-

 OFF/ON

D PERIMETER LIGHTS 

-

 TIMEOUT 15 SEC

D SEAT RECALL 

-

 OFF/ON

D RECALL POSITION 

-

 MEMORY/EXIT

D TILT MIRROR 

-

 OFF/ON

D DRIVER ID 

-

 OFF/ON

If you would like to exit the selection mode without
moving through each of the personalization features,
simply press a different button on the DIC or turn 
off the ignition. The personal choices you made will 
still be retained, even without passing through each of
the features.

If you happen to move past a selection you would like to
make a personal choice for, press unlock on your
transmitter or press the appropriate driver number on the
memory seat control. This will return you to the
beginning of the option feature programming mode.

A description of each feature programmable through the
DIC follows.

Automatic Door Locks

The door lock modes when shifting in and out of 
PARK (P), can be changed through the DIC. You can
change these modes by different selections of the
following DIC displays:
D AUTO DOOR LOCKS 

-

 OFF/ON

D UNLOCK 

-

 OFF/ON

D UNLOCK 

-

 KEY OFF/PARK

D DOOR TO UNLOCK 

-

 DRIVER/ALL

Summary of Contents for 2000 Bonneville



















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands