manualshive.com logo in svg

Pontiac 2000 Bonneville, Owner'S Manual

Share
Download
Pontiac 2000 Bonneville Owner'S Manual Download Page 14

1-2

Seats and Seat Controls

This section tells you about the seats 

--

 how to 

adjust them 

--

 and also about reclining seatbacks 

and head restraints.

Manual Front Seat

CAUTION:

You can lose control of the vehicle if you try to
adjust a manual driver’s seat while the vehicle is
moving. The sudden movement could startle and
confuse you, or make you push a pedal when you
don’t want to. Adjust the driver’s seat only when
the vehicle is not moving.

Pull up on the control bar located under the front of the
seat to unlock it. Slide the seat to where you want it.
Then release the bar and try to move the seat with your
body to make sure the seat is locked into place.

Power Seat (If Equipped)

The controls for the power seats are located on the
outboard side of each front seat.

Summary of Contents for 2000 Bonneville



















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands