manualshive.com logo in svg

Pontiac 2000 Bonneville, Owner'S Manual

Share
Download
Pontiac 2000 Bonneville Owner'S Manual Download Page 304

6-29

CAUTION:

The brake wear warning sound means that soon
your brakes won’t work well. That could lead to
an accident. When you hear the brake wear
warning sound, have your vehicle serviced.

NOTICE:

Continuing to drive with worn

-

out brake pads

could result in costly brake repair.

Some driving conditions or climates may cause a brake
squeal when the brakes are first applied or lightly
applied. This does not mean something is wrong with
your brakes.

See “Caliper/Knuckle Maintenance Inspection” in
Section 7 of this manual under Part C “Periodic
Maintenance Inspections.”

Properly torqued wheel nuts are necessary to help
prevent brake pulsation. When tires are rotated, inspect
brake pads for wear and evenly torque wheel nuts in the
proper sequence to GM specifications.

Brake linings should always be replaced as complete
axle sets.

See “Brake System Inspection” in Section 7 
of this manual under Part C “Periodic 
Maintenance Inspections.”

Brake Pedal Travel

See your dealer if the brake pedal does not return to
normal height, or if there is a rapid increase in pedal
travel. This could be a sign of brake trouble.

Brake Adjustment

Every time you apply the brakes, with or without the
vehicle moving, your brakes adjust for wear.

Summary of Contents for 2000 Bonneville



















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands