manualshive.com logo in svg

Pontiac 2000 Bonneville, Owner'S Manual

Share
Download
Pontiac 2000 Bonneville Owner'S Manual Download Page 131

2-67

Brake System Warning Light

Your vehicle’s hydraulic brake system is divided into
two parts. If one part isn’t working, the other part can
still work and stop you. For good braking, though, you
need both parts working well.

If the warning light comes on, there is a brake problem.
Have your brake system inspected right away.

United States

Canada

This light should come on briefly when you turn the
ignition key to RUN. If it doesn’t come on then, have it
fixed so it will be ready to warn you if there’s a problem.

If the light comes on while you are driving, pull off the
road and stop carefully. You may notice that the pedal is
harder to push. Or, the pedal may go closer to the floor.
It may take longer to stop. If the light is still on, have the
vehicle towed for service. (See “Towing Your Vehicle”
in the Index.)

CAUTION:

Your brake system may not be working properly
if the brake system warning light is on. Driving
with the brake system warning light on can lead
to an accident. If the light is still on after you’ve
pulled off the road and stopped carefully, have
the vehicle towed for service.

When the ignition is on, the brake system warning light
will also come on when you set your parking brake. The
light will stay on if your parking brake doesn’t release
fully. If you try to drive off with the parking brake set, a
chime will also come on until you release the parking
brake. If the light stays on after your parking brake is
fully released, it means you have a brake problem.

If you have the optional Driver Information Center, a
PARK BRAKE SET message will be displayed while
the park brake is set.

Summary of Contents for 2000 Bonneville



















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands