manualshive.com logo in svg

Pontiac 2000 Bonneville, Owner'S Manual

Share
Download
Pontiac 2000 Bonneville Owner'S Manual Download Page 118

2-54

Express Sunroof (Option)

If your vehicle is equipped
with this option, the switch
is located between the 
sun visors.

The sunroof switch can be operated in four directions to
control sunroof movement. The switch will work only
when the ignition is on or when the ignition is off and
the Retained Accessory Power is active.

The sunroof has both manual and express features for
opening the glass panel and sunshade.

Press and hold the switch rearward to the first position
to open the glass panel and sunshade. The sunshade can
also be opened by hand. To close the glass panel, press
and hold the switch forward. As the glass panel closes, 
it will open slightly toward the vent position to provide
a better seal. The sunshade can only be closed by hand.

Press and release the switch rearward to the second
position to express open the glass panel. It will stop in a
partially open position. The glass panel may be fully
opened by pressing the switch rearward again. When the
glass panel is express opening, pressing the switch in
any direction will stop it. Please note that if you press
and hold the switch in the express open position for
more than one and a half seconds, the express open
operation will be overridden and the sunroof will
operate manually.

To vent open the glass panel, press and hold the switch
upward. The sunshade must be opened by hand. 
To close the glass panel, pull and hold the 
switch downward.

Summary of Contents for 2000 Bonneville



















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands