manualshive.com logo in svg

Polymetron SODIMAT 9073, Instruction Manual

Share
Download
Polymetron SODIMAT 9073 Instruction Manual Download Page 88

SODIMAT - Model 9073

C-8

ACCIDENTAL RELEASE MEASURES

Person-related precautionary

Do not inhale vapors.

measures 

Procedures for

Use a liquid absorbant tissue, par example Chemizorb. Clean up affected

cleaning/absorption

area.

EXPOSURE CONTROLS/PERSONAL PROTECTION

Personal protective equipment

respiratory protection required if vapors are generated.

Eye protection

required

Hand protection

required

Industrial hygiene

Change contaminated clothing. Application of skin-protective barrier cream
recommended; Wash hands after working with substance.

TOXICOLOGICAL INFORMATION

Acute toxicity

DL50 (oral, rat) : 2100 mg/kg

Further toxicological information

in case of vapor inhalation : mucous irritation, coughing and .breathing
troubles
In case of skin contact : irritation. 
In case of eye contact : irritation
in case of ingestion of high quantities : vomiting, nausea

ECOLOGICAL INFORMATION

Ecotoxic effects

Toxicity on fish CL50 : 525 mg/l

Further ecologic data

Biodegradable.  Easily removable. In case of appropriate evacuation, there
should be no perturbations in the sewerage plants biologicallly adapted.

DISPOSAL CONSIDERATIONS

Product

There are no uniform EC Regulations for the disposal of chemicals or
residues. Chemical residues generally count as special waste. The disposal
of the latter is regulated in the EC member countries through corresponding
laws and regulations. We recommend that you contact either the authorities
in charge or approved waste disposal companies which will advise you on
how to dispose of special waste.

Packaging

Disposal in compliance with official regulations. Handle contaminated
packaging in the same way as the substance itself. If not officially specified,
non-contaminated packaging may be treated like household waste or
recycled.

The information containedherein is based on the present state of our knowledge. It characterizes the product with regard
to the appropriate safety precautions. It does not represent a guarantee of the properties of the product.

Summary of Contents for SODIMAT 9073

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands