Polymetron SODIMAT 9073, Instruction Manual

Page: 82 / 88

SODIMAT - Model 9073
C-2
PHYSICAL AND CHEMICAL PROPERTIES
Form : liquid
Colour : colourless
Odour : amine-like
Ph value: not available
Melting temperature: -96 C
B
Boiling temperature : 83 - 84 C
B
Ignition temperature: 295 C DIN51794
B
Flash point : - 17 C DIN51755
B
Explosion limits:
Lower : 1,5 vol%
Upper : 8,5 vol%
Vapour pressure : (20 C) 100 hPa
B
Density : (20 C) 0.72 g/cm
B
3
Solubility in :
water (20 C) soluble
B
organic solvents (20 C) soluble
B
STABILITY ET REACTIVITY
Conditions to be avoided : none
Substances to be avoided : oxidizing agents, acids
Hazardous decomposition products : none information available
Further information : hygroscopic, sensitive to air
TOXICOLOGICAL INFORMATION
Acute toxicity : DL50 (oral, rat) = 770 mg/kg
Further toxicological information :
After skin contact : severe irritations
After eye contact : severe irritation
After inhalation : irritations of the mucous membranes, coughing, and dyspnoea. Danger off skin absorbtion.
ECOLOGICAL INFORMATION
Do not allow to enter drinking water supplies, waste water, or soil !
DISPOSAL CONSIDERATIONS
Product : there are no uniform EC regulation for the disposal of chemicals or residues. Chemical residues generally count
as special waste. The disposal of the latter is regulated in the EC member countries through corresponding laws and
regulations, and in the federal republic of germany also by the individual federal states. We recommend that you contact
either the authorities in charge or approved waste disposal companies which will advise you on how to dispose of special
waste.
Packaging : disposal in accordance with local legal provisions.
The information contained herein is based on the present state of our knowledge. It characterizes the product with regard to
the appropriate safety precautions. It does not represent a guarantee of the properties of the product.