Polymetron SODIMAT 9073, Instruction Manual

Page: 43 / 88

SODIMAT - Model 9073
5-9
Remark
In order to receive only "one" transmission of the measurement data, select command 820
(1) and print the following command : "R830".
Command Function Option
800
0* No transmission of alarm limits
1 Transmission of S1 and S2 limits
2 Transmission of the alarm system
3 Transmission of the S1 and S2 limits and the alarm system
810
0* RS232 inactive
1 RS232 active
820
0 Continuous transmission of measuring data
1 Transmission on request only
830*
------------ Transmission of the data measurement (if C820 = 1)
840
0* 300 baud
1 600 baud
2 1200 baud
3 2400 baud
4 4800 baud
5 9600 baud
* : Command accessible only via RS232. It is not displayed..
5.5 Use of the interface RS232
The following codes enable the RS232 interface. Specifications of these codes :
@
Speed in baud (Command 840)
@
1 stop bit
@
No parity bit
@
8 bits per word
The data are in ASCII form :
M1 : 23.00 ppm 25.0 C -360.0 mV
B
The transmitter sends back the data received to allow the reception control.
TRANSFERED CONTROL OF THE SODIMAT
2 characters allow the transfered control : "@" and "!"
the "@" character transfers the control to the computer. The "!" character passes the control to the Monec
keyboard. The control transfer to a remote computer deactivates the transmitter keyboard.