Polycom Viewstation 128 User Manual Download Page 86

Page: 86 / 140

System Information

ViewStation User’s Guide

To go back to the Diagnostics screen, use the arrow buttons on the remote
to highlight the Menu icon and then press the SELECT button.

To return to the main calling screen at any time, press the
CALL•HANG-UP button on the remote.

Network Statistics

The Network Statistics screen describes the video and audio protocols and the
speeds at which your call will travel over the network and to the party you are
calling. You can also check the status of your call.

TIP:

To run diagnostics during a video call, press the MENU

button on the remote. The main calling screen will

appear. When you are finished diagnosing your system,

press the CALL•HANG-UP button and you’ll have the

option of disconnecting the call or staying in the call.

Summary of Contents for Viewstation 128













































































































































Search results

Summary of Contents for Viewstation 128

Reviews:

Related manuals for Viewstation 128

Brands by name

Popular brands

Polycom Viewstation 128, User Manual

Search results

Summary of Contents for Viewstation 128

Reviews:

Related manuals for Viewstation 128

Brands by name

Popular brands