manualshive.com logo in svg

Polycom Global Management System, User Manual

Share
Download
Polycom Global Management System User Manual Download Page 78

73

Chapter 5      Provisioning

Global Management System User’s Guide

Here is a screenshot of the provisioning console.

Figure 5.1 Provisioning

Provisioning functional buttons

Provision

Click on this button to schedule Provisioning for the endpoints. The scheduler works just like the 
Soft Update scheduler.

Cancel Provisioning

Cancels Provisioning for the selected endpoints. The endpoint must be in pending status.

Clear Status

The status for provisioning will remain on record until it has been cleared.

Configure Provisioning

Opens the Provisioning Configurations page. Provisioning profiles determine endpoint settings. 
Multiple profiles can be created tailored to different groups of endpoints.

System status 

column added

Current profile 

for selected 

endpoint

For determining 

time zone  of 

endpoint

Monitor 

Provisioning 

Status

Selection 

Buttons

Provisioning 

buttons

Page for setting 

provisioning 

profiles

Tab section to 

get detailed 

info for systems

Profile that is to 

be provisioned

Provisioning Console

Summary of Contents for Global Management System





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands