manualshive.com logo in svg

Polycom Global Management System, User Manual

Share
Download
Polycom Global Management System User Manual Download Page 174

169

Appendix

Appendix

Global Management System User’s Guide

V-Series Admin Setup Menu

System Info :: Admin Setup :: Video Network :: 

IP Network

Firewall

V-Series Field

Type

Meaning

Fixed Ports

Checkbox 
option

Checked: Enables the use of fixed ports on this 
system.

Fixed TCP ports lower 
limit

User Defined 
Field

Specifies lower limit for TCP fixed ports used by this 
system.

Fixed TCP ports upper 
limit

User Defined 
Field

Specifies higher limit for TCP fixed ports used by 
this system.

Fixed UDP ports lower 
limit

User Defined 
Field

Specifies lower limit for UDP fixed ports used by 
this system.

Fixed UDP ports upper 
limit

User Defined 
Field

Specifies higher limit for UDP fixed ports used by 
this system.

NAT Configuration

Pull Down 
Menu

Specifies whether the system should determine the 
NAT Public WAN Address automatically.
• If the system is behind a NAT that allows HTTP 
traffic, select Auto.
• If the system is behind a NAT that does not allow 
HTTP traffic, select Manual.
• If the system is connected to the IP network 
through a Virtual Private Network
(VPN), select Off.

NAT Public Address

Checkbox

Checked - Displays the address that callers from 
outside the LAN use to call your system.

Address Displayed in 
Global Directory

Checkbox

Checked - Displays this system’s address in the 
public or private Global Directory.

NAT is H.323 
Compatible

Checkbox

Checked - Specifies that the NAT is H.323 
compatible.

Summary of Contents for Global Management System





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands