manualshive.com logo in svg

Polycom Global Management System, User Manual

Share
Download
Polycom Global Management System User Manual Download Page 181

176

Appendix

Appendix

Global Management System User’s Guide

V-Series Admin Setup Menu

System Info :: Admin Setup :: 

LAN Properties

LAN Properties

V-Series Field

Type

Meaning

Connect to my LAN

Checkbox 
option

Specifies whether the system is part of the LAN.

Allow IP calls

User Defined 
Field

Enables the system to make and receive IP calls.

IP Address

Pull Down 
menu

Specifies how the system obtains an IP address.

• Obtain IP Address Automatically — Select if the 
system gets an IP address from the DHCP server 
on the LAN.
• Enter IP Address Manually — Select if the IP 
address will not be assigned automatically.

Use the Following IP 
Address

Pull Down 
menu

If the system obtains its IP address automatically, 
this area displays the IP address currently assigned 
to the system.

If you selected Enter IP Address Manually, enter the 
IP address here.

DNS Servers

User Defined 
Field or Auto 
Populated with 
DHCP

Displays the DNS servers currently assigned to the 
system.

If the system does not automatically obtain a DNS 
server address, enter up to four DNS servers here.

Default Gateway 

User Defined 
Field or Auto 
Populated with 
DHCP

Displays the gateway currently assigned to the 
system.

If the system does not automatically obtain a 
gateway IP address, enter one here.

Subnet Mask

User Defined 
Field or Auto 
Populated with 
DHCP

Displays the subnet mask currently assigned to the 
system.

If the system does not automatically obtain a subnet 
mask, enter one here.

Summary of Contents for Global Management System





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands