manualshive.com logo in svg

Polycom Global Management System, User Manual

Share
Download
Polycom Global Management System User Manual Download Page 111

106

Chapter 8      System Configuration      

Server Preferences

Global Management System User’s Guide

CDR Maintenance Configuration

Report configuration enables the user to set the variables for storing CDR data. 

Archive data older than 

- How often data is archived and written to disk. At this point, the data 

that is archived is removed from the database and can only be viewed by using the archived 
files on disk. 

Delete archives older than

 - The number of days archived data remains on disk before 

deletion. After these archives are deleted, the data is no longer under the control of Global 
Management System. 

Local time for archive maintenance

 - The time of day when archive maintenance occurs. The 

time should be a period of the day when there is not expected to be much traffic through Global 
Management System. 

The CDR data is stored to disk and can be found in the directory shown below on the server 
where Global Management System is installed. Note that the archived files are in .csv format. 
drive:\program files\polycom\pwx\CDR\<device type> 

CDR Synchronization Configuration

For ViewStations and V-Series that are not connected to Global Management System, CDR 
data is still being collected by these endpoints. CDR Synchronization allows for the synching 
up of call data between the endpoint and Global Management System. This feature prevents 
the loss of data when an endpoint is not connected to Global Management System because 
the ethernet cable to the endpoint is unplugged but the endpoint is still in an ISDN call. When 
the ethernet cable is reconnected with the endpoint, thus resulting in the reestablishing of the 
Global Management System - endpoint connection, Global Management System will retrieve 
the call data recorded by the endpoint when it was disconnected from the LAN during the 
synchronization period specified in this page.

Enable CDR synchronization 

- Enables this feaure.

Synchronize every

 - The frequency at which Global Management System is synchronizing call 

record data, the default is 0 days.  The maximum interval is every 21 days.

Local time for synchronization

 - The time of day that the server will be synchronizing call 

data.

Summary of Contents for Global Management System





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands