manualshive.com logo in svg

Polycom Global Management System, User Manual

Share
Download
Polycom Global Management System User Manual Download Page 43

38

Chapter 2  System Management

Global Management System User’s Guide

This window contains information specific to the device selected in the System list. Below is a 
screenshot of System Information tabs for a ViewStation.

Figure 2.3 System Management Tabs

Detailed information regarding the tabs for each device is found in the appendix on page 118.

General

  

With the exception of the General Tab, the descriptions below pertain 
to the video endpoints.
Displays general system information for video endpoints, server status 
for WebCommander and response strings for Other Device

Interface

 

Reveals the network configurations for the selected video endpoints

Call Status

Detailed call status information

Network Stats

Describes the video and audio protocols used

Advanced Stats

Displays audio and video transmission rates

Video 

Shows video sent and received by the selected ViewStation

QoS

Displays the components that allows the differentiation and 
preferential treatment of network traffic for iPowers

Details

Displays detailed information on video and audio configuration for 
ViaVideo 

Summary 

Displays summary information on endpoint and bandwidth statistics in 
PathNavigator 

Management 

Displays the URL of the different servers that manage the selected 
video endpoints 

Alerts

Lists errors and/or warnings that are occurring with the selected video 
endpoints 

System Information Window

Summary of Contents for Global Management System





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands