Polycom Global Management System User Manual Download Page 63

Page: 63 / 220

Chapter 3 Global Directory

Global Management System User’s Guide

Global Directory Configuration

Configuring the server for ILS

1. From the Global Directory window, select the

Configuration

button. A pop up window will

appear.

2. Two tabs are labeled with ILS or LDAP. Select the

ILS

tab.

3. Enter the following information:

Field

Description

Address

Name or IP address of server

Port

Use 0 to accept the default protocol
If ILS is from Site Server 3.0, then its port is 389.
If ILS is from Windows 2000, the its port is 1002.

Optional

PASSWORD

Optional

4. Click on

Update

Deleting your configuration settings

If changes have been made to ILS server, select the configuration button. Click on the ILS tab
and then click on delete. The ILS configuration entry will be deleted.

Summary of Contents for Global Management System





























































































































































































































Search results

Summary of Contents for Global Management System

Reviews:

Brands by name

Popular brands

Polycom Global Management System, User Manual

Search results

Summary of Contents for Global Management System

Reviews:

Brands by name

Popular brands