56
Chapter 3 Global Directory
Global Management System User’s Guide
Global Directory Configuration
Configuring your Server to Allow Updates to the Active Directory Schema
1. Open a DOS command prompt.
2. Run command: “regsvr32 c:\winnt\system32\schmmgmt.dll”. If successful a window will
appear and state Dll Register Server Succeeded.
3. From the Start Menu:
Select
Run
and type the following command line: “mmc /a” and the Microsoft Management
Console window will open up.
4. From the console drop down menu: select
Add/Remove Snap in
. A new window will open
up.
5. In Add/Remove Snap-in window:
6. Click on
Add
and select “Active Directory schema” from list.
7. Click on
Add
then click
Close
.
8. Close “Add/Remove Snap-in” window by clicking on
OK
.
9. From the console window:
Select
Active Directory Schema
in the left pane within the console
10. In this window:
11. Select
Operations Master
from the action pull down menu.
12. Change Schema Master window opens up. Make sure that the “Schema may be modified
on this Domain Controller” is checked.
13. Select
OK
and close window.
Summary of Contents for Global Management System
Page 1: ...Global Management System User Guide ...
Page 118: ...Appendix ...
