manualshive.com logo in svg

Polycom Global Management System, User Manual

Share
Download
Polycom Global Management System User Manual Download Page 182

177

Appendix

Appendix

Global Management System User’s Guide

WINS Server

User Defined 
Field or Auto 
Populated with 
DHCP

Displays the WINS server currently assigned to the 
system.

If the system does not automatically obtain a WINS 
server IP address, enter one here.

WINS Resolution 

Checkbox 
option

Sends a request to the WINS server for WINS 
name resolution.

LAN Speed

Pull Down 
menu

Specify the LAN speed to use. Note that the speed 
you choose must be supported by the switch.

Choose 

Auto

 to have the network switch negotiate 

the speed automatically. If you choose 10 Mbps or 
100 Mbps, you must also select a duplex mode.

Duplex Mode

Pull Down 
menu

Specify the Duplex mode to use. Note that the 
Duplex mode you choose must be supported by the 
switch.
Choose 

Auto

 to have the network switch negotiate 

the Duplex mode automatically.

Summary of Contents for Global Management System





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands