Polaris Timbersled ST 93 RIPPER 2019, Owner'S Manual

Page: 54 / 84

2. Slide provided 7/16” x 6-1/2” swing arm bolt
r
in from the left hand side of
the bike and tighten lock nut
y
to listed torque specification.
TORQUE
54 Nm (40 Ft. Lbs)
3. Bolt the lower portion of the strut rod
e
to the kit assembly
q
using the
provided M 10 x 40mm bolt
w
. DO NOT TIGHTEN until after upper portion of
strut rod has been bolted in place.
4. See note below before continuing.
NOTE
KAWASAKI MODELS ONLY skip Step 4 and complete Steps 5 and 6. For
Honda and Yamaha models continue with Step 4.
Bolt upper portion of the strut rod
e
into the bike’s upper shock bracket using
the bike’s upper shock mount bolt or pin. For bikes using a bolt, torque to the
bike manufacturer’s specifications. Once you have the upper portion of the
strut rod in place, torque the lower portion of the strut rod to the specification
listed below.
TORQUE
60 Nm (44 Ft. Lbs)
For Honda and Yamaha models continue to the Brake Line Assembly and
Routing section.
52
INSTALLATION