Polaris Timbersled ST 93 RIPPER 2019, Owner'S Manual

Page: 53 / 84

10. Check to ensure all previous steps are complete. You are now ready to start
the assembly portion of the process.
REAR RIPPER ASSEMBLY
Left Side Right side
Spacer
Spec.
Part # Spacer
Spec.
Part #
Honda 0.80 mm 5141218
6.87 mm
5141219
Kawasaki N/A N/A N/A N/A
Yamaha N/A N/A 15 mm 5141220
*Left and Right as positioned sitting on the bike
1. Locate rear track assembly
q
and position it up to the rear swing arm bolt
location on the bike. Some fit kits will require spacers
t
on one or either side
of the frame, located between the Ripper frame mount brackets and the
bike’s swing-arm bolt bracket location. See table at the beginning of this
section for specific bike model spacers.
NOTE
Kawasaki KLX models do not require any spacers. Honda CRF models require
left and right swing arm bolt spacers/reducers. Yamaha TTR models require a
single spacer positioned on the right side of the bike.
51
INSTALLATION